The Aquabot Turbo T Jet robot pool cleaner provides an easy way for you to keep your in-ground pool clean. Its wide non-marring wheels allow the Turbo T Jet to move over any type of surface and move up curved floor-to-wall transitions with ease. This cleaner is easy to use, and will wash every nook and cranny of your pool, all while filtering down to two microns.
The Turbo T Jet works on its own and doesn’t require the use of heavy hoses that have to be moved as the cleaner goes about its cycle. All you need to do is turn it on, drop it in the water, and the robot will take care of the rest. In most cases it will take less than two hours.
Using its water jet propulsion technology, the Aquabot Turbo T Jet blasts away stubborn debris and dirt from the surface of your pool. The internal filtration system takes care of bacteria, algae, leaves, dirt, and sand. Additionally, because of the way the Turbo T Jet is designed, you won’t have to worry about replacing parts that wear out quickly.
Aquabot Turbo T Jet Features
- Designed for in-ground pools
- Cleans any pool design
- 2-hour automatic shut off
- Non-marring wheels
- Cleans concrete, tile, gunite, fiberglass, and vinyl surfaces
- Weighs 10.75 pounds
- Filtration system filters down to 2 microns
- Jet drive propulsion
- No poles or hoses needed
- EZ swivel device
- 50-foot cable
- Two-year warranty
Efficient filter system
The Aquabot Turbo T Jet comes with a very efficient filtration system. It includes two separate filter bags. One bag is mesh and is ideal for capturing larger contaminants like leaves and acorns, while the other is a bag that you’ll use to filter out algae and bacteria down to the two-micron level. With this type of filtration system, the Turbo T Jet will leave your pool looking sparkling clean.
Power washing jets
The power washing jets found on the Turbo T Jet are one of the coolest features on this pool cleaner. With power washing jets, the cleaner aims strong streams of water at the surface of the pool where the most stubborn or demanding debris may be present. The power of the water is typically enough to blast the stain off the surface and into the water where the Turbo T Jet will capture it.
Built-in motor pump
The Aquabot Turbo T Jet houses only one motor, but that one is all it needs to drive both its propulsion and vacuum. With its powerful motor, the Turbo T Jet can filter through 5,000 square feet of pool surface each hour. Debris and dirt and loosened up by the powerful jets which are then captured by the filtration system inside the unit.
Any surface or shape
No matter what shape or surface the Aquabot Turbo T Jet is cleaning, you’ll encounter no problems. It can handle fiberglass, concrete, and vinyl while cleaning kidney, L-shaped, rectangle, or oval pools. With its sliding axle, the Turbo T Jet keeps from getting stuck, and you can use the pin-locking mechanism to adjust the cleaning pattern to fit your needs.
Lightweight and durable
Checking in at just under 11 pounds, the Turbo T Jet is one of the more lightweight pool cleaners available. It is easy to remove from your pool which makes it both efficient and easy to move. Additionally, the cleaner is designed with a lack of brushes and belts which means you won’t have to spend a lot of time on replacement parts.
The Aquabot Turbo T Jet features its NeverSTuck System. This system works to prevent the Turbot T Jet from getting hung up in corners or coves of your pool, or in the area near your steps. As a result, you don’t have to keep a watchful eye on your cleaner. Just drop it in and let it go.
Pros of the Aquabot Turbo T Jet
- Efficient cleaning in little time
- NeverStuck System prevents cleaner from getting hung up
- Weighs only 10.75 pounds
- Filters down to two microns
- Requires little to no supervision
- Powerjet technology gets rid of tough debris
- Two-year warranty
Cons of the Aquabot Turbo T Jet
- No handle
- Works with in-ground pools only
What Others Are Saying
The reviews for the Aquabot Turbo T Jet are close to split when it comes to user experience. Some users complained that the Turbo T Jet does not climb and clean walls like it’s supposed to. Others mentioned that the cleaner begins to have issues after cleaning for about a month and that it does not provide the thorough cleaning expected.
On the flip side, many customers like that the Turbo T Jet is built with one motor. They like that there are fewer moving parts which means less wear and tear overall on the cleaner. A few users brag that the Turbo T Jet is easy to use and gets their pool sparkling clean each time. One user specifically mentioned that he uses his weekly since he lives in California and has yet to experience any problems with the device.
Aquabot Turbo T Jet is a Solid Entry Level Pool Cleaner
The Aquabot Turbo T Jet is a simply designed pool cleaner that offers a solid performance each time it cleans. It’s easy to use, which is perfect for those that prefer to take their cleaner straight out of the box, drop it in the water, and forget about it.
Its two-micron filtration system means you’ll get rid of many of the bacteria and other contaminants that make themselves comfortable in your pool. It also means you’ll be saving on chemicals since your water quality will be much better after each cleaning.
The Aquabot Turbo T Jet is the perfect device if you’re looking to get into the robot pool cleaner market. You’ll get a thorough and complete clean after each cycle and you won’t have to worry about keeping an eye on it as the cleaner goes about its cleaning. It eliminates the need to get out and clean your pool every day which gives you time to focus on other tasks.